[Drew2U]

Both highway and local roads. It is rated to tow, so as long as you don't go over the rating it shouldn't hurt anything..

I bought a Curt hitch and wiring harness, reasonably simple install.

Class 1 Trailer Hitch, 2" Receiver, Select Toyota Corolla Cross

Toting your mountain bikes to your new favorite trail? Taking the kayaks out for a quiet day on the water? Packing the car for another weekend camping trip? Don't leave anything behind; Bring It® with a CURT trailer hitch! CURT class 1 trailer hitches are the perfect way to add extra storage...

www.curtmfg.com

Custom Wiring Harness, 4-Way Flat Output, Select Toyota Corolla Cross

Making memories doesn't start when you reach your destination; it starts at the very first mile of your journey. Wherever your road begins and wherever it takes you, Bring It® with the power of CURT. CURT custom wiring provides everything you need to connect your vehicle's electrical system to a...

www.curtmfg.com

Joel

Hiya Joel. 1. Does the Hitch sit below the rear bumper or did you have to notch the bumper? (pics if you have them) and 2. Do you have to disable the rear sensors during towing to eliminate false alarms? Thanks

 

[Drew2U]

Yes, the hitch is below the bumper - only the receiver is visible. You do have to cut a very small piece of the lower bumper, but you wouldn't really see it unless you were under the car (even if you took the hitch off). I didn't disable any sensors, but my SE doesn't have parking assist.

Joel

Thanks for the info .... greatly appreciated.

 

[Drew2U]

Hiya Group.

For the Hitch install ....videos online seem to indicate the removal of the Bumper Facia .... a fairly intensive proceedure.

Has anyone installed without doing this? as in reach up between the facia and vehicle?

Thanks.