2023's have the same thing. only the xle have the extending tail light into the rear gate
Thanks for responding. I had already put a deposit down on an LE when I discovered this. I think I will research some things to put on the back to make myself more visible during my 30-45 day wait.2023's have the same thing. only the xle have the extending tail light into the rear gate
maybe even just swapping the tail lamp bulbs to LED would be beneficial! I believe they are just a regular bulb.Thanks for responding. I had already put a deposit down on an LE when I discovered this. I think I will research some things to put on the back to make myself more visible during my 30-45 day wait.
Thanks. I’ll check into that as well.maybe even just swapping the tail lamp bulbs to LED would be beneficial! I believe they are just a regular bulb.
yup so i've heard.. a lot of people having a hard time taking it out.. i'll have to check with a tech to see what the trick is.I swapped the license plate bulbs to bright white LED and that makes a HUGE difference too! I can be seen now!
I’ve tried to remove the tail assembly with no success…after removing the only 2 screws, I couldn’t remove the tail assembly, it is so stuck in there thatI was afraid I was going to damage it so I gave up.
What is the reason for wanting to remove that part? I’m asking because I have no knowledge about how to do these things and my mechanic nephew is going to help me with doing some of these upgrades.yup so i've heard.. a lot of people having a hard time taking it out.. i'll have to check with a tech to see what the trick is.
someone wants to swap from the le tail lights to the xle tail lights..What is the reason for wanting to remove that part? I’m asking because I have no knowledge about how to do these things and my mechanic nephew is going to help me with doing some of these upgrades.
Ohh okay. Thanks for explaining that!someone wants to swap from the le tail lights to the xle tail lights..
Hi there I managed to remove the tail light on the back door and side. The side light slide out after you remove the two bolt hold them in place. On the gate there are three bolts holding it in place, these are on tight so a little is needed. Hope that helps .yup so i've heard.. a lot of people having a hard time taking it out.. i'll have to check with a tech to see what the trick is.
The side light slide out after removing the two bolts? I did remove those two bolts and couldn’t get it out. I was afraid I was going to damage it.Hi there I managed to remove the tail light on the back door and side. The side light slide out after you remove the two bolt hold them in place. On the gate there are three bolts holding it in place, these are on tight so a little is needed. Hope that helps .
They do slide to the rear with a LOT of pulling. The clips holding them are fiercely strong.The side light slide out after removing the two bolts? I did remove those two bolts and couldn’t get it out. I was afraid I was going to damage it.
Mine didn’t slide out, they seemed to be clipped to something inside.
will try it one more time. I’ll swap the bulbs to LED if I manage to slide it out. Thank youThey do slide to the rear with a LOT of pulling. The clips holding them are fiercely strong.
I have the same issue. Can´t remove the taillight assembly. Did you have any luck? I even got some suction cups to see if that will help me pulling them out and nothing! so frustrating!The side light slide out after removing the two bolts? I did remove those two bolts and couldn’t get it out. I was afraid I was going to damage it. Mine didn’t slide out, they seemed to be clipped to something inside.
Yes! Actually I had to pay a technician do install some bumper LED lights and he had to remove both tail lights to do the wiring. You just need to apply a lot of effort hahah I mean, you need to slide towards the back with a lot of strength! Yeah! Be careful with the connectors the cables are short.I have the same issue. Can´t remove the taillight assembly. Did you have any luck? I even got some suction cups to see if that will help me pulling them out and nothing! so frustrating!
Thanks for your response. I guess I´ll have to go to a shop for someone to help me. I don´t have much physical strength! heheYes! Actually I had to pay a technician do install some bumper LED lights and he had to remove both tail lights to do the wiring. You just need to apply a lot of effort hahah I mean, you need to slide towards the back with a lot of strength! Yeah! Be careful with the connectors the cables are short.
I think once you remove them for the first time, it will get easier the next time.Thanks for your response. I guess I´ll have to go to a shop for someone to help me. I don´t have much physical strength! hehe